Hayward Super Pump 1.5 HP vs BLACK+DECKER 1.5 HP Variable Speed: Full Comparison
Spec-for-spec breakdown of two of the most popular 1.5 HP inground pool pumps — price, warranty, flow rate, energy use, and what to check before you swap.
The long-running industry standard. Proven single-speed workhorse, shorter warranty, higher run cost.
Variable speed, Energy Star certified, and backed by a 5-year warranty — the longest in its class.
Shop at PoolPartsToGo — $1,199.95Spec-by-spec comparison
Highlighted cells mark the stronger spec in each row. Where a manufacturer doesn't publish a figure, we say so.
| HaywardSuper Pump 1.5 HP | BLACK+DECKER1.5 HP Variable Speed | |
|---|---|---|
| Price | Varies by dealer Sold through authorized dealer network | $1,199.95 PoolPartsToGo price today — often found for less than the Hayward |
| Warranty | 1 year Standard manufacturer warranty | 5 yearsLongest in class |
| Max flow rate | 110 GPM | 110 GPM Tie — identical rated flow |
| Horsepower | 1.5 HP | 1.5 HP Tie |
| Speed type | Single speed | Variable speedProgrammable 1,200–3,450 RPM |
| Energy Star certified | No | YesMay qualify for utility rebates |
| Voltage | 115 / 230V | 115 / 230V Tie — dual voltage |
| Noise level | Not published by manufacturer | 45 dB at low speedRoughly dishwasher-quiet |
| Plumbing connections | 1.5" / 2" unions | 1.5" / 2" unions Tie — direct swap |
| Weight | 36 lbs | 41 lbs Heavier — larger motor assembly |
What the spec differences mean
5-year warranty
Pool pumps typically fail from seal and bearing wear in years 2–4 — exactly the window a 1-year warranty leaves you exposed. Five years of coverage means one less replacement cycle you pay for.
Variable speed pays twice
Running at low RPM for daily filtration cuts energy use up to 70% vs single-speed. Energy Star certification may also qualify you for a utility rebate — check rebates in your ZIP code.
Same footprint, often for less
Identical flow rating and union sizes make this a like-for-like swap — and it's often found for less than the Hayward, before you count energy savings and utility rebates.
Replacing a Hayward Super Pump? Check these three things
The Super Pump uses 1.5" or 2" unions. The BD-VS1500 matches both — existing plumbing connects without adapters.
Base bolt pattern is within 1/4" of the Super Pump pad layout. Fits the existing equipment pad in nearly all installs.
Both pumps run 115V or 230V. Confirm which your current pump is wired for before ordering — it's on the motor label.